Overflow System

Discussion in 'General Discussions' started by howard, Jul 10, 2016.

  1. howard

    howard

    Joined:
    Mar 15, 2016
    Messages:
    691
    Likes Received:
    1
    Location:
    Benoni
  2. Guest




  3. cft

    cft

    Joined:
    Jan 12, 2016
    Messages:
    190
    Likes Received:
    12
    Location:
    Pretoria - Centurion
    I have built two sets, both 40mm dia and with std bends etc.
    Think your limitation would be the required diameter - bending springs only up to 25mm? If you can manage to make open, accurate bends there is no need to use separate fittings.
    Make sure the piping material is suitable for potable water use - not sure if normal conduit would be?
     
  4. OP
    howard

    howard

    Joined:
    Mar 15, 2016
    Messages:
    691
    Likes Received:
    1
    Location:
    Benoni
    If not conduit , what can you suggest. I have only have small tanks.
     
  5. Broder

    Broder

    Joined:
    Jun 3, 2013
    Messages:
    3,020
    Likes Received:
    34
    Location:
    East London
    I have done it extensively on larger diameter bends by heating the pvc pipe with a paint stripper heat gun. You can bend the pipe into position, then hold it there, or cool with water to set into place. If you do sharp bends in this manner, the pvc constricts or kinks, so you may want to fill the pipe with sand or something, just to prevent this. Try it.. Let us know how it goes.
    Ps.. You can also heat pvc pipe like this and pull it. The diameter then gets smaller, cool, cut off, and you have a custom diameter to fit into or over flexible pipes, pumps, etc..
     
  6. Ryno

    Ryno Kenaal baber

    Joined:
    May 19, 2012
    Messages:
    4,022
    Likes Received:
    50
    Location:
    Pretoria
    its just easier and more neat to use 90degree bends you buy. i think conduit might become brittle over time
     
  7. OP
    howard

    howard

    Joined:
    Mar 15, 2016
    Messages:
    691
    Likes Received:
    1
    Location:
    Benoni
    Thanks for the reply's. I think it is back to the drawing table to re evaluate the set up and needs.
     

Recent Posts

Loading...
Similar Threads - Overflow System Forum Date
POKPO Overflow Siphon Device 2500 - Easily Create an Overflow System Jungle Aquatics Feb 18, 2017
DIY overflow system - needs input and advice Anything DIY related Dec 1, 2011
Wanted: Drill hole for overflow. Wanted/Swop/Freebies Mar 16, 2026
Swop: 5ft tank with overflow wanted Wanted/Swop/Freebies May 18, 2025
Overflow box question General Equipment discussion Jul 21, 2021
Attachment that goes on top of overflow pipe General Discussions Sep 30, 2020
Overflow sump and co2 General Discussions Apr 24, 2020

Share This Page