How does it work ?

Discussion in 'General Discussions' started by DewaldC, Jun 8, 2012.

  1. DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    DSC_0007.jpg

    DSC_0008.jpg
    Thanks

    DSC_0007.jpg

    DSC_0008.jpg
     
  2. Guest




  3. Firefly

    Firefly Pleco

    Joined:
    Jul 3, 2010
    Messages:
    2,333
    Likes Received:
    33
    Location:
    East London
    Water flows in through the white things in chamber 3. Then over flows to chamber 2 and under to 3? Or the other way around.
    Put sponge/floss where water flows over. Then bio media. Then pump and heater. Looks like a nice tank. What are the plans?
     
  4. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Thanks ,My sailfin pleco got to big for this 30l tank so i got a 3ft tank.
     
  5. trevor1971

    trevor1971 trevor1971

    Joined:
    Dec 12, 2011
    Messages:
    50
    Likes Received:
    2
    Location:
    Randpark Ridge - JHB
    Hi Dewald,

    Put your heater in chamber 1 (behind white vents)' filter material in middle chamber (rock at the bottom) then filter wool on top. Return pump in last chamber.
     
  6. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Thanks Trevor 1971 :laugh:
     
  7. Francois Marais

    Francois Marais

    Joined:
    May 28, 2012
    Messages:
    89
    Likes Received:
    1
    Location:
    Roodepoort
    I remember starting like that... beginning of the end… :D
     
  8. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Is it working
    DSC_0139.jpg

    DSC_0139.jpg
     
  9. Razer2007

    Razer2007 Danelle Vivier

    Joined:
    Nov 25, 2011
    Messages:
    1,278
    Likes Received:
    17
    Location:
    Melkbosstrand, Cape Town
    Does it flow from the filter floss underneath to the bio media, through the sponge and then over and out through the vents? Where's your heater? I'd put it in that open chamber :D
     
  10. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Yes, but heater is too big.
     
  11. bylaag

    bylaag

    Joined:
    Sep 1, 2010
    Messages:
    240
    Likes Received:
    1
    Location:
    Honeydew Ridge, Roodepoort
    Doesn't it flow the other way, through the vents first and then pumped back from the last chamber? Why is there no photo of the front? Have you added anything?
     
  12. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    See for yourself.
    DSC_0141.jpg

    DSC_0141.jpg
     
  13. Gert Combrink

    Gert Combrink

    Joined:
    Sep 14, 2008
    Messages:
    1,786
    Likes Received:
    16
    Location:
    Protea Hights, Brackenfell, Cape Town.
    Just to help a bit: This is a typical internal filter, working the same as a sump.

    The intake is in the left-hand chamber(3), then it flow over the glass partition, through the black sponge(mechanical filter) and down chamber 2. (I will put the filter-wool, another mechanical filter, under the black sponge.)
    Then the water flow underneath the glass partition and up (Through the bio-beads),to your return pump, and back to tank.

    Now for an efficient filter, you need to:
    1) Trap large particles (in settling-chamber 3), (Small fry can also end up in here!)
    2) Then trap more large particles in the pores of the black sponge- Mechanical Filter. Chamber2.
    3) finer particles get trapped by the filter-wool - Mechanical Filter. Chamber 2.
    4) Clean water pass underneath and up through the volcanic rock and bio-beads. Dirt can hardly block the fine pores. Biological Filter. Chamber 1.
    5) Return pump on top of bio-beads, return water to tank and spray-bar can be used.

    Hope this will help...
     
  14. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Thanks a lot it makes sense :bigsmile:
     
  15. OP
    DewaldC

    DewaldC Magikarp

    Joined:
    Jan 26, 2012
    Messages:
    1,867
    Likes Received:
    28
    Location:
    Roodepoort
    Hi ,I have changed it for the better.
    DSC_0212.jpg

    DSC_0211.jpg


    DSC_0212.jpg

    DSC_0211.jpg
     
  16. Gert Combrink

    Gert Combrink

    Joined:
    Sep 14, 2008
    Messages:
    1,786
    Likes Received:
    16
    Location:
    Protea Hights, Brackenfell, Cape Town.
    Looking good!
    You can still put a large piece of black sponge on top of the filter sponge.
    That way, you will keep large particles from clogging the filter-wool.
     
  17. BBQ

    BBQ

    Joined:
    Jan 30, 2012
    Messages:
    1,023
    Likes Received:
    10
    Location:
    Pretoria
    Can i make a suggestion??
    I had my tanks made out like that aswell.
    The 1st chamber would be where water and waste would flow in, as far as I can see, the glass is shorter (which is right)
    Generally i would keep that section clear of media (as you can see a collection of the "crap" that is been collected)
    the 2nd chamber would be right with the ceramic rings but i would recommend Seachem Matrix at the bottom layer as
    then put the ceramic rings on top of it and then add a layer of batting then put the wools on top ( you wont need so much wool)
    saves u on wool cos this is the part that you have to change often.
    You can add carbon on top of the wool (inside a stocking)
    3rd chamber a pump (or i see you have 3 outlets to push the water out naturally.
    The initial cost will be high, but in a long run it will actully save you money,
    The biggest reason I say keep the 1st chamber clear is not only for a check on "crap"
    but also if you have fry, it will make it into the 1st chamber and it can be a safe haven for them
    and does not have to fight or get stuck into the wool.
    http://www.tropicalaquarium.co.za/showthread.php?11212-Finally-MY-Double-stack-stand!/page6
    take a look at page 6-7 of the my post and u can see sorta what i mean.
    I will provide another picture later with the current state
    Hope this helped
     
  18. BBQ

    BBQ

    Joined:
    Jan 30, 2012
    Messages:
    1,023
    Likes Received:
    10
    Location:
    Pretoria
    and the heater could be on the 3rd chamber so out of the fishes way
    and not in ur sight as well unless you like the heaters view (some people do)
     
  19. Gert Combrink

    Gert Combrink

    Joined:
    Sep 14, 2008
    Messages:
    1,786
    Likes Received:
    16
    Location:
    Protea Hights, Brackenfell, Cape Town.
    @BBQ, If you look carefully, the chambers are marked 3,2,1. But the water-flow is from chamber 3 to 2 and then 1.
    Yes, I know he marked it the wrong way round to the water-flow...
    His inlet chamber (where the large particles settles) is on the left, with the white vent holes/grids.
     
    Last edited by a moderator: Oct 2, 2016

Recent Posts

Loading...

Share This Page