Flow rates for a 30L tank

Discussion in 'General Discussions' started by BugMan, Nov 17, 2011.

  1. BugMan

    BugMan Green Spotted Puffer

    Joined:
    Aug 22, 2011
    Messages:
    765
    Likes Received:
    12
    Location:
    Pretoria Gauteng
    Hey... I still don't completely understand the flow rates for filtration... :amazed:

    I am going to put up a new 30L tank for the pigmy puffer fish next week and i am wonder what kind of filtration flow rate is the required flow rate...

    As far as i can figure out a flow rate of 170L per hour will be way to much... or not??? Should i go for a flow rate of 90L to 120L per hour instead??
     
  2. Guest




  3. Firefly

    Firefly Pleco

    Joined:
    Jul 3, 2010
    Messages:
    2,333
    Likes Received:
    33
    Location:
    East London
    170L should be fine. Want to cycle a tank about 4-7 times and hour.
     
  4. OP
    BugMan

    BugMan Green Spotted Puffer

    Joined:
    Aug 22, 2011
    Messages:
    765
    Likes Received:
    12
    Location:
    Pretoria Gauteng
    Last edited by a moderator: Oct 2, 2016
  5. Sean J

    Sean J

    Joined:
    Jan 12, 2009
    Messages:
    3,835
    Likes Received:
    36
    Location:
    Randburg JHB
    Woah, that's hectic flow for such a small tank. The best thing to do is check the flow when you use it. If it's too strong, then just dial it back a bit. Easy as pie. Just make sure you throttle back the output of the pump and not the input.
     
  6. Vez

    Vez

    Joined:
    Jan 16, 2011
    Messages:
    2,076
    Likes Received:
    19
    Location:
    Krugersdorp Jhb
    what type of filtration will you be using? does it have a direct outlet? or a small spraybar? if you can run it into a spraybar, you can UP the flow rate, and the fish will be fine.
     
  7. OP
    BugMan

    BugMan Green Spotted Puffer

    Joined:
    Aug 22, 2011
    Messages:
    765
    Likes Received:
    12
    Location:
    Pretoria Gauteng
    I am most probably going to use a spray bar... so i think it will work at about 170L per hour then... but i will test it with some guppy fry... If they can survive it the puffers will be ok... :-D
     
  8. Jandre

    Jandre

    Joined:
    Sep 6, 2011
    Messages:
    20
    Likes Received:
    2
    Location:
    Centurion
    hehehe. . .nice. . .let the guppies have it. . .
     
  9. Vez

    Vez

    Joined:
    Jan 16, 2011
    Messages:
    2,076
    Likes Received:
    19
    Location:
    Krugersdorp Jhb
    if you use a spraybar, then 170 will be fine, i have a 1000l/h canister, connected to a spraybar(3 pipes) and the flow is heavy spread out. so you should be fine, and if you see that its still to hectic, just remove the bar, drill some extra holes in them, and Tadaaaa!!!!
     
  10. Vis

    Vis Gerhard

    Joined:
    Oct 26, 2009
    Messages:
    6,130
    Likes Received:
    132
    Location:
    Rustenburg
    I use a 300L/H internal filter in my 30L. The flow is directed at the back panel. They get clogged pretty quickly and the flow is then perfect for the tank.
     
  11. Reedfish

    Reedfish Moderator

    Joined:
    Aug 2, 2011
    Messages:
    13,311
    Likes Received:
    3,714
    Location:
    UK
    I have always been led to believe that 3 1/2 to 4 times an hour is more than sufficient. So I would say up to 120L/H is fine.
    Bigger filters will create too much of a current in a small tank. :egg:
     
    Last edited: Nov 17, 2011
  12. azurekoi

    azurekoi Loaches & Gobies

    Joined:
    Sep 29, 2010
    Messages:
    4,077
    Likes Received:
    61
    Location:
    Pretoria
    75l tank here - 6000 liter an hour flow pump.... Endlers breeding like crazy.... Generaly accepted that you should take the tank volume a minimum(Note: Minimum) of 4 x per hour... All fish will easily cope with up to 10 times that.....My baby Endlers...they just grow up a lot more muscular...lol
     
  13. Sean J

    Sean J

    Joined:
    Jan 12, 2009
    Messages:
    3,835
    Likes Received:
    36
    Location:
    Randburg JHB
    Hehehe, I had a weird picture of an endler coming to the front of the glass and saying, I'll be back!

    Ok, then perhaps I am mistaken... But 180 liters an hour in a 30 liter tank is quite hectic.
     
  14. OP
    BugMan

    BugMan Green Spotted Puffer

    Joined:
    Aug 22, 2011
    Messages:
    765
    Likes Received:
    12
    Location:
    Pretoria Gauteng
    170L divided by 30L = 5.66666 times tank volume per hour... So i think that will do it???
     
  15. azurekoi

    azurekoi Loaches & Gobies

    Joined:
    Sep 29, 2010
    Messages:
    4,077
    Likes Received:
    61
    Location:
    Pretoria
    lol - the Endlers weren't supposed to end up in a high flow river tank,but hey,the best laid plans of mice and men....

    All through my life I have loved going to natural rivers and sitting watching our local fish in their natural environments... the flow they live in is far higher than what we have in our aquariums... dont confuse the flow needed for proper biological filtration with just plain water column movement... Most truely sucsessfull high tech planted tanks have a minimum flow rate of 10 times turnover per hour....
     
  16. Wyvren

    Wyvren Retired Moderator

    Joined:
    Jan 31, 2011
    Messages:
    2,549
    Likes Received:
    21
    @BugMan my smaller Jebo is about 27L and the trickle filter that comes with the tank is a 300L/h pump. I had to baffle it a bit to let my plants grow in peace otherwise they blew away. Also my Siamese Fighter was constantly attacking the outlet where the water pumped out of. Now that I baffled it (aka I placed a small piece of filter sponge in the tube that blows out - so the water comes out just a tiny bit slower.) there has been no issues at all!
     
    Last edited by a moderator: Oct 2, 2016
  17. Zoom

    Zoom Retired Moderator

    Joined:
    Apr 13, 2009
    Messages:
    8,469
    Likes Received:
    119
    Location:
    Jhb- Fourways
    Guys, I think we need to step back a little here and take a look at the various filter option.

    I'll use my tank as an example...

    280litres.
    We generally all agree that we should be aiming for 5-10 times volume per hour turn over... but what we forget to add in there is "dependant on filter". When you buy a filter, it is usually rated for a certain sized tank. When I originally bought my tank, I had a big horrible internal filter. It was specifically rated for a 300litre tank, but the turnover of the pump was only 980l/h. This is just over 3 times the volume. However the tank ran superbly for many months... (and I will admit this was when I was a beginner.. and seriously overstocked.)

    When I decided to change over to a canister, I bought one that was specifically aimed for a tank of 210l, but the turn over of the pump was 1300l/h.

    So we need to bear in mind that the rule of 5-10 time the volume is extremely dependant on the TYPE of filter you are using. Let's be honest here... if you put an internal filter into a 30 litre tank rated at the minimum we recommend of 5 times turn over, that's a 150litre internal pump... that' a HUGE amount of force you are putting into that tank. you WILL land up with hectic currents.

    Vez made a good point... put a spraybar onto a 170l/h filter... BUT... you will not be getting 170l/h out that filter anymore. The spraybar does help dissipate that pressure, but it also acts as a back pressure and will slow the pump down.

    In my current set up I have 2 cannisters... one rated at 1300 and one rated at 1100. This means I am runing my 280l tank volume over 8.5 times an hour. Let's include for height and assume I am getting a total of 2000l/h. If I go and buy a 2000l/h internal filter for my tank, i will probably blast the fish straight out the tank. The force coming out of an internal 2000l/h filter is VERY different to the force coming out of a 2000l/h trickle filter, or sump, or canister.

    Let my explain this way... if you turn your hosepipe on full, the force coming out there is (for example purpose) 2bar pressure. If you put this hose pipe into a bucket and let it overflow (like in a trickle), the water pouring out the bucket it not going to be 2 bar (!). But the input is still 2 bar?? So even thought the pumps are always the same (2bar in this case) the output changes according how it is being used. (This is the easiest way to explain it without having to go back to school to relearn physics...)
     
  18. OP
    BugMan

    BugMan Green Spotted Puffer

    Joined:
    Aug 22, 2011
    Messages:
    765
    Likes Received:
    12
    Location:
    Pretoria Gauteng
    Thank you @Zoom... I'm going to use an internal filter but with a spray that will spay the water back into the tank from above the water... I want to do so to assist with aeration in the tank... But i will put it in without any fish and see how the plants are affected and will set it by using the plant movement as an indication to how strong the flow is...

    Thank you for all the advice...
     
    Last edited by a moderator: Oct 2, 2016
  19. Rickus

    Rickus

    Joined:
    Aug 10, 2010
    Messages:
    645
    Likes Received:
    10
    Location:
    Bethlehem
    +1 @Zoom. Well said.
     
    Last edited by a moderator: Oct 2, 2016

Recent Posts

Loading...
Similar Threads - Flow rates tank Forum Date
Filtration rates, flow, and other questions Advanced Topics Dec 31, 2010
Flow of clean RODI water too slow?? General Discussions Mar 27, 2026
Wanted: Drill hole for overflow. Wanted/Swop/Freebies Mar 16, 2026
Swop: 5ft tank with overflow wanted Wanted/Swop/Freebies May 18, 2025
Looking for a juwel bioflow M General Equipment discussion Jul 23, 2024
Wanted: Looking for a Flowerhorn Cichlid Wanted/Swop/Freebies Feb 27, 2024
Wanted: Flowbins Wanted/Swop/Freebies Feb 12, 2024

Share This Page